Correct use of plastic tarpaulin

Standardize the use of plastic tarpaulin, and pay attention to meet the requirements of using tarpaulin every time. Only in this way can the safety of using plastic tarpaulin be ensured.

First of all, it should be noted that tarpaulin is only applicable to gondola cars, one car covered with a tarpaulin. Secondly, the use of tarpaulin to ensure that the tarpaulin cover flat, no goods exposed. Ridge at the top, close angle at both ends, smooth lines on both sides. The size of each part does not exceed the limit. Finally, the rope is tied and tied to ensure the correct position, the knot is firm, and there is no slack off. The rope tied on the T-shaped iron is butterfly shaped knot, and the length of the rope head and tail is 100 to 300 mm.

The correct use of plastic tarpaulin has certain specification requirements, we must use it correctly according to the specification, in order to better use plastic tarpaulin.

When using plastic tarpaulin, we still need to pay attention to some details. We need to see the following items for details.

The first is not to wear shoes when using, because it will damage the strength of the tarpaulin. And keep it dry. The new tarpaulin should be coated with a layer of seam glue at the place where the waterproof seam glue is applied. This is for better waterproof. During the construction, it should be firm to prevent collapse. Regular cleaning should also be carried out to prevent the growth of bacteria, especially those that are not used for a long time. When using, do not contact with objects that are difficult to clean, which will cause difficulty in cleaning.

Attention to the details of the use of tarpaulin is of great help to our use, and it can also extend the service life of the tarpaulin, so we should be more careful.